Price Comparisons of Pioneer GEX-P920XM XM Satellite Tuner

Buy Pioneer GEX-P920XM XM Satellite Tuner

Pioneer GEX-P920XM XM Satellite Tuner Product Description:

• XM Radio tuner designed for Pioneer "SAT Radio Ready" and "XM Ready" headunits and AV receivers
• Includes roof-mount antenna with 16-1/2-foot cable, cabling for connection of module to Pioneer stereo
• XM channel, program, artist, or song name displays on Pioneer stereo's 16-character readout (2002 and older models display 8 characters)
• Up to 18 channels, six for each of the three XM bands, can be stored in memory
• 170 channels are available coast-to-coast
• Listen to XM Radio (subscription required)
• Compatible with Pioneer "SAT Radio Ready" Receivers
• 180+ Channels available Coast-to-Coast
• This product is NOT COMPATIBLE with the following models: AVH-P6400CD, AVH-P6400, DEH-P8500MP, DEH-P850MP, KEH-P2030

Product Description

The GEX-P920XM is an XM satellite radio tuner designed for Pioneer "SAT Radio Ready" and "XM Ready" CD, DVD, and Navigation receivers. Also features display information such as Channel Name, Channel Category, Artist/Feature Name, Song/Program Title, or Composer.

Customer Reviews

Most helpful customer reviews

27 of 29 people found the following review helpful.
No more vent clip and wire farm on my dash...
By Paul M. Provencher
I was really tired of the cheesy little XM receiver that I had - it clipped on to the vent and had three wires (antenna, power, and sound to the head unit). It was time to change.My Pioneer DEH-P980BT is Satellite Radio ready and this unit is compatible. So I ordered it and installed it. It was just as easy to install as the cheesy unit and has the added benefit of being hidden away, and integrated into the display of my Pioneer Head Unit.What I had not counted on was the improvement in sound quality. Even directly wired through the AUX connection of my stereo, the cheesy XM radio had some sound limitations. With FM Modulation (wired or wireless), it was horrid. The GEX-P920XM puts all that behind you!Now I have XM as another sound source on my main stereo, all the info displays through the main unit, I have 18 presets, can search by category or station, and there's nothing blocking my air vent!Get this - you will not regret it. Even if you already have something plugged into your IP-BUS port on your Pioneer Stereo, you can add this - they string together like a network so you are not limited to just one unit! I use this together with the CD-IB100II iPod Adapter and it's bliss!

13 of 15 people found the following review helpful.
Works good, plus great 'unknown' subscription coupon
By JJ
Installed myself and hooked up to my new Pioneer AVH-P3100DVD. After install I thought I had a bad unit; wouldn't show up as a source on the head unit. Finally deduced I hadn't properly grounded the ground wire. Had it hooked up to the inside of my trunk, under the rear deck. The trunk is all metal, but apparently not all grounded? Attached to a mounting screw of my shock, and voila!The antenna head is tiny, the picture doesn't do it justice. Just larger than my thumb! Still trying to figure out a suitable exterior mounting location. Worried it'll get popped off whenever I go through a carwash. Oh well, there are bigger worries in my life than that. :-)Searched the web for a coupon code. Found an awesome one: XMSCION03.$77/yr (XM Everything plan) + waived activation fee ($14.99). Couldn't apply it online as it only gave me the free activation fee. Had to call. But it worked. And you don't have to be a Scion owner. Sweet.

7 of 7 people found the following review helpful.
Works well, but it's huge
By DonShulaDoingTheHula
This product is pretty straightforward: it's easy to install and works very well. I'm happy with the sound quality and reception. Running the antenna to the roof is easy, and there's enough antenna wire included to get there.However, I can't get over how large this gizmo actually is. For something with four connections, I was expecting smaller. Considering that portable units like the XpressRC and XMP3 have all of the same functions in a much smaller package, AND have built-in screens, this tuner seems gigantic.The included mounting hardware isn't much to speak of; I can see it being used only if you're going to mount the device under a seat, directly to the floor of the vehicle. This appears to be the way Pioneer assumes you will do your installation, as the IP-Bus cable included is an unholy length (I didn't measure, but it's got to be longer than the antenna wire and ten times as thick). If you mount this product anywhere near your dash, you'll have quite an excess of wire to hide. I put mine in the glove compartment and called it a day.Overall, this product is great. Just expect to spend a little time trying to figure out where to put it in your vehicle.

See all 46 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discounted Bose Wave Radio II Graphite Gray W/ Remote

Buy Bose Wave Radio II Graphite Gray W/ Remote

Bose Wave Radio II Graphite Gray W/ Remote Product Description:

• Engineered to a bold new standard for crisper, more accurate sound than the original Wave radio
• Easy to use: no buttons, and the credit card-sized infrared remote controls all functions
• Distinctive and elegant design: streamlined styling

Product Description

Bose Wave Radio II - Graphite Grey color.

Customer Reviews

Most helpful customer reviews

341 of 352 people found the following review helpful.
Great Sound and Easy to Use But There's a Catch
By M. JEFFREY MCMAHON
The Bose Wave Radio II is easy to use, has top-of-the-line speakers and has a high-quality build. I use mine as a TV stereo speaker. The auxiliary input works for that function and what I like is that it doesn't take up a lot of space next to the TV. Indeed, incredible sound for the size of the speakers. So why only four stars, not five? Because the Bose, for all the money it costs, is not a top radio performer. It has only average AM reception with its internal ferrite antenna and worse its FM relies on the power cord for what is truly a lame "antenna." So as a speaker, the Bose is great but as a radio it is well below par. For hooking up to your TV, the Bose is outstanding. But as a bedside radio? No way. You would be better off buying a 159-dollar Sangean WR-2, a 259-dollar Sangean HDR-1, a 159-dollar Eton Sound 100 (my favorite for its retro look) or a 159-dollar Tivoli Songbook for your bedside. But if you're integrating the Bose into your TV home entertainment system and you don't mind spending the money and you're not fastidious about your FM reception, then you will enjoy the Bose.

61 of 64 people found the following review helpful.
Bose Wave Radio II
By T. Garwood Jr.
This latest model has excellent sound and an elegant look. However, the controls are no longer on the unit itself but only on the remote. Aside from the problem of where to store the remote in a secure spot so that it doesn't fall behind the bedside table or on the floor, I use this radio as an alarm so this frequently creats problems when I am sleepily fumbling for the snooze button or the off button and I either can't find the remote or I brush it off the bedside table and under the bed. Of course, that means that I do get up but in a very irritable mood.

100 of 112 people found the following review helpful.
over priced product
By pop fan
It wasn't worth the money that I payed for. It is a good radio if you have an external antenna. I would play it in the office and could never get a decent signal until I had to pay an extra $30 for an antenna. If you are going to pay $300 plus you should get something that works out of the box. I could have purchased a lesser know brand and recieved better reception then what I got. Overall if you want to end up purchasing more products to make your system work to perfection this is the product for you. There are plenty of products that don't cost as much and deliver everthing this did and more.

See all 44 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Get the Best Price for Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

Buy Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack Product Description:

• Roof-mounted garage stock rack; pulley system raises and lowers for easy access
• Lifts and stores up to 250 pounds high above garage floor without using a ladder
• Heavy-duty steel support beams; assembly required
• Includes support beams, 4 by 4 platform, winding axle, vinyl coated steel cable, mounting hardware
• 4-square-foot storage platform; 76 pounds; 1-year limited warranty

Product Description

This ceiling-mounted garage elevator lets you load and lift storage items overhead, out of the way, without a ladder. Simply load the 4-by-4-foot steel platform while you safely stand on the ground, then raise it to the ceiling by cranking the handle. It's great for boxes, tires, large tools, snowblowers, ladders, lumber, third-row car seats, canoes, kayaks, and more.

Customer Reviews

Most helpful customer reviews

283 of 288 people found the following review helpful.
Good product. Unforgiving design.
By AaronR
After shopping for a garage ceiling storage system, I purchased this device. I was attracted to the ability to raise and lower the platform to load and unload items. This avoids the obvious pitfalls of using a ladder to hoist large or heavy items up from the ground.In summary, I am reasonably happy with the overall product with some exceptions mentioned below. However, I will caution potential buyers that the design of this device is unforgiving. Unless your ceiling joists are EXACTLY 48" apart (they can be 1.5" less but not more than 48"), installation will be no where near as easy as the video on the website. You may need to mount this to a rigid board first if your joists are not 48" apart. The axle is not made to be adjustable and I find this to be a major design flaw of the device.The foundation of the system includes 3 heavy metal grates that are secured to two metal cross beams with J hooks. I had a little trouble aligning the J hooks with the holes on the metal beams. However, by far, the most trouble I had was with securing the system to the ceiling. I really did not want to mount this to a board before securing it to the ceiling for aesthetic reasons. My ceiling joists were about 49" apart (instead of 48") and this created a VERY problematic installation. You need to secure this into wood (and not just the ceiling drywall) and you cannot mount the arms of the device further than 48" apart as the axle will not be long enough. I ended up lengthening the axle by a few inches by screwing both halves of the axle together with only the first set of holes. The two halves of the axle are supposed to come together with one inside the other aligning two sets of holes on each piece. I only went as far as the first set thus making it a little longer. Then I bought some aluminum 1/2 inch metal from a hardware store and reinforced the axle by screwing it to two sides of the axle. Keep in mind that the axle is not completely load-bearing so as long as it is rigid and reinforced, the system will work fine (see my uploaded picture of the lengthened and reinforced axle).Problems continued when I used the included hardware lag bolts to screw the arms into the ceiling joists. Using a drill, I pre-drilled the holes as instructed and used a socket wrench to screw the lag bolts to the joists. I torqued 4 of the heads off of the cheap lag bolts. Do yourself a favor and go buy some better lag bolts at a hardware store before installing this device. The included lag bolts are totally inferior. After finishing the installation, it worked as described and I loaded it with a few hundred pounds of things I had previously kept on my garage floor. I will also mention that using the included crank device to raise and lower the platform, while not overly difficult, is a good work out.Overall, I would recommend this product IF you know your joists are no further than 48" apart (or you are comfortable mounting it to a board first) and you go buy some decent lag bolts before trying to secure it to the ceiling.

169 of 176 people found the following review helpful.
Here's a better approach than the manual shows
By Gary L. Finfrock
I just finished my install today. Plan on at least 4 hours for this project. The joist do not have to be EXACTLY 48" as other reivews stated. That is the MOST the distance can be. You can be as close as 46 1/2. There is play in the bar that attaches the two ends.Here's my contribution to make this easy and keep it a one person job. Get a 4 foot piece of 1 1/4 lattic piece of trim. You can find it at any big box hardware store. This will be used as your template when drilling holes.I have a finished ceiling Before getting started, I used the 4' lattice to outline the joist. Instead of using a stud finder, which doesn't always work, I just use a finish nail to find the edges of the joist which are 1 1/2" wide. I marked the joist at one end and measured 48" down then found the edges of the joist. I put the lattice between these marks on both ends, then traced the lattice with a pencilIn step 7, you notice the only indicate 7 bolts to be installed, but 9 in step 8. You have to remove the nylon rings in order to reach all 9 bolts, but this isn't mentioned. With the nylong rings off and the arm sitting on top of the lattice piece of wood, mark all the slots in the middle with a pencil. Make sure to mark the center of the T-bracket, too. This is critical for hanging the arms by yourself.Since the pre-drill hole size is 1/8, make the template holes one size larger at 3/16 with a drill. With the template, use a wood screw in the center template hole to temporarily attach to the joist so you have both hands free to line up the lattic to the trace marks I mentioned before. Now drill the pre-drill holes with the 1/8 bit.The manual doesn't mention this but there are those keyhole type of holes in the middle part of the arm. BEFORE you grab the arm in step 7, but the first lag bolt in the middle pre-driller hole, leaving about 1 1/2 inch. Now pick up the arm and angle it over the lag bolt in the middle. It takes a little wiggling, but it will eventually slide in. Now tighten the lag bolt, but not 100% Now the joist is hanging hands free from one lag bolt. Now, you are free to mount the other lag bolts by yourself.The stock lag bolts are junk. I shredded two when installing. I did install the stock lags so I could line up the two arm properly, but came back later with high quality lags of qty. 12 5/16" with a 3 1/2 length lag bolts. Trying to enlarge this existing gaps don't work very well. What I recommend is drilling BETWEEN the existing slots. First use a smaller bit to get thru the metal easier and create a pre-drill hole. I think I used a 3/16". Then I used a slightly larger bit like a 7/16" to cut a hole to allow it pass thru the new hole in the metal. Make sure you use eye protection and cover your forearms. The metal shaving are burning hot! Don't attach the 5/16" lags until Step 9 alignment is done.

68 of 70 people found the following review helpful.
Nice but installation instructions come up short.
By JAM
This is a great storage solution for garages with high ceilings. Once installed the heavy lift works very well.One drawback is that many garages have a double layer of 5/8" drywall on the ceilings as mine did. The mounting lag bolts are only #12(the metric equivilant) screws 2" long which is woefully short if the extra thickness of drywall is considered. The only easily available lagscrews I could find that were longer were 1/4" by 3" long. These were too large in diameter to fit through the #12 mounting slots in the ceiling brackets, so I had to drill new holes which was very labor intensive and cumbersome.Secondly, The order of operations as described in the installation instructions is not very usefull if you are installing the lift by yourself. It is much easier to loosely mount the center of each ceiling bracket to the ceiling first and then attach the extension arms one at a time. If this is done first as indicated in the instructions, the assemblies are prety heavy, and cumbersome to be holding over your head while up on a ladder, pre-drilling holes through the bracket, and then installing the lag screws. This cost me at least an hour to assemble, and then dis-assemble the brackets just so I could handle the peices.Thirdly, the instruction have a flat out error when it comes to the order of operations for installing the winding shaft. If you follow the instructions as written, you will again have to dis-assemble what you are instructed to do. The winding shaft must be inserted through both ceiling brackets first, through the gear box brakcet, and back into the bearing bracket. Following this the gear box can be installed.Lastly, it is very important that the brackets are not installed too far apart. I did not calculate the tolerance available, but ran into a problem when my available ceiling joists were between 49 and 50 inches apart. This rendered my lift incapable of being assembled without modification.So far I have installed 2 of my 3 lifts, and each lift had one nut which had no threads in it. This left me one nut short for each assembly. If this is a standard piece of hardware for the installation, there were no self tapping screws included for this nut. I ended up needing a different solution for holding the winding crank together.The drawbacks of this lift are pretty typical of most "low cost" products these days that are being manufactured "off shore". This is a great device with many quality oversights, including the lack of a mastery of the English language.

See all 341 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buying Jack Georges Milano Collection Double Gusset Top Z-Red

Buy Jack Georges Milano Collection Double Gusset Top Z-Red

Jack Georges Milano Collection Double Gusset Top Z-Red Product Description:

• Its sophisticated yet practical design features our Easy Access Organizer, shoulder strap, and satin nickel hardware

Product Description

-Materials: Hand Crafted from Scratch and Stain Resistant Italian Leather

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
I love this briefcase! It looks very professional and sophisticated.
By Mimi
I love this briefcase! It looks very professional and sophisticated. I looked for it all over and got the best price for it at amazon.com. I received it right away, and I even got free shipping. I will buy more Jack Georges products for sure. Excellent quality!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Reviews of Cricket Centrix Haircutting Scissors 575 5 3/4"

Buy Cricket Centrix Haircutting Scissors 575 5 3/4"

Cricket Centrix Haircutting Scissors 575 5 3/4" Product Description:

• Japanese Cryogenically-treated Stainless Steel
• Hollow-ground, Convex Advanced Blade Desgn
• Flat-body, Thin-profile Shear Design Without Protruding Adjuster
• Comfortable "bridge" for Natural Finger Placement
• Offset Ring Configuration

Product Description

Designed with ergoomics and versatility in mind. Cutting, blending, and texturizing all become simplified when you use the Centrix shears.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
great price and great product great scissors and hard to find this size. Used lots of scissors and these are my favorite
By Sheeny
great scissors and hard to find this size. Used lots of scissors and these are my favorite. Nice and sharp

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons for Radix Adventures Ogre's Launcher

Buy Radix Adventures Ogre's Launcher

Radix Adventures Ogre's Launcher Product Description:

Product Description

The Beast Master Madoz is preparing to attack the castle with an authentic war weapon - the catapult! He teaches the Ogre how to use it, since the Ogre is the only one strong enough to place the bullets and hit the launcher. Madoz uses the light-up torch to show the Ogre the way to the castle. Includes two figures, torch and two bullets. 7 pieces. Measures approximately 11" x 6.5" x 6" when complete.

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
Let the Adventures Begin
By C. Skelton
This was the first of the mega bloks radix toys we purchased and hope to eventually have them all. They are extremely durable and reasonably priced. If your child is into the fantasy/knights scene this is great for the young years. The weapons light up and they are easy to pose. They are definately not building blocks like most mega blok items. The perfect action figures for the young.

1 of 1 people found the following review helpful.
Great fantasy toy
By Laurie Finnerty
This toy is an excellent accessory to the Radix adventure collection. My four year old got this six moths ago along with the rest of the radix toys and he is still playing with them all the time. They are the best castle toys I've seen yet and I have a 11 and 12 year old so I've seen and had many castle sets over the years. By the way even the older kids love the toys. The only unforunate thing is the line was under advertised and seems to be hard to find so if you see the toys grab them.

0 of 0 people found the following review helpful.
Ogre's Launcher
By Susan Caron
We were quite pleased, and surprised when we opened the box - the ogre was much larger than expected! It seems to be a very durable toy, and my 4 year old son seems to enjoy playing with it very much.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Fire N and Ice Dragons Mega Bloks Fyren Sea Phoenix Warship

Buy Fire N and Ice Dragons Mega Bloks Fyren Sea Phoenix Warship

Fire N and Ice Dragons Mega Bloks Fyren Sea Phoenix Warship Product Description:

• 22 pieces
• ages 8+

Product Description

Fire Ice Dragons 9834 Fyren Sea Phoenix Warship

Customer Reviews

Most helpful customer reviews

0 of 1 people found the following review helpful.
Another great set from Mega Bloks!
By pigpen's sister
A huge set that includes a warship, Aquaestis blaze dragon, 2 firing cannons, 1 firing harpoon and 10 minifigures. Very detailed!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!